To Help Prevent Corrosion

You can help prevent corrosion from getting started by observing the following:

See also:

Raising the Car
After inserting a wrench bar into the wheel nut wrench, install the wrench bar into the jack as shown in the drawing. To raise the vehicle, turn the wheel nut wrench clockwise. As the jack begin ...

Armed Stage
Park the car and stop the engine. Arm the system as described in the following paragraph. 1) Remove the ignition key from the ignition switch. 2) Make sure that all doors, tail gate (3 Door) and ...

Headlamp delay (if equipped)
If you turn the ignition switch to the ACC or OFF position with the headlights ON, the headlights (and/or tail lights) remain on for about 20 minutes. However, if the driver’s door is opened and c ...