SMOOTH CORNERING

Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be held to a minimum.

    See also:

    Driveshafts and Boots
    Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease. ...

    Compliance Label
    The compliance label is located on the driver's side of the center pillar outer panel. The label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gro ...

    Evaporative Emission Control (Including ORVR: Onboard Refueling Vapor Recovery) System
    The Evaporative Emission Control System is designed to prevent fuel vapors from escaping into the atmosphere. (The ORVR system is designed to allow the vapors from the fuel tank to be loaded into ...