Lane Change Signal

To indicate a lane change, move the lever up or down to a point where it begins flashing.
The lever will automatically return to the center position when released.
See also:
Jump starting
WARNING:
The gas produced by the battery during the
jump-start operation is highly explosive. If
these instructions are not followed exactly,
serious personal injury and damage to the
vehicle m ...
Drive Belts
Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation
and replace if necessary. Drive belts should be checked periodically for proper
tension and adjusted as neces ...
Rear Brake Drums/Linings, Parking Brake
Check the rear brake drums and linings for scoring, burning, leaking fluid, broken
parts, and excessive wear. Inspect the parking brake system including the parking
brake lever and cables. For det ...


