Seat Belt Warning Light and Chime
The driver's seat belt warning light and chime will activate to the following table when the ignition switch is in "ON" position.
*1) Warning pattern repeats 11 times with an interval of 24 seconds. If the driver's seat belt is buckled, the light will stop within 6 seconds and chime will stop immediately.
*2) The light will stop within 6 seconds and chime will stop immediately.
See also:
Bi-level heating
Your Hyundai is equipped with bi-level heating
controls. To use this feature:
o Set the air intake control to the fresh air
() position.
o Set the air flow control at the bi-level ()
position.
...
Rear Combination Light
1. Open the trunk lid (4 Door) or tail gate (3 Door).
2. Remove the cover on the inside of luggage trim.
3. Remove the nuts of the rear combination light with a spanner.
4. Detach the rear ...
After Changing Wheels
If you have a tire gauge, remove the valve cap and check the air pressure. If
the pressure is lower than recommended, drive slowly to the nearest service station
and inflate to the correct press ...